43 Simovert Masterdrive drives from 0.75 kW to 700 kW
Number of project hours: 215 hours
Project duration: 8 days
2 technicians
Client expectation
A manufacturer of heat-laminated steel drums based in Germany wished to back up one of its production lines. Indeed, the electrical installation of the latter, which processes the manufacture of drums with a 98% pure alloy destined for top range automobiles, had not been updated since its first commissioning, in other words for more than 15 years. Within this context, it was imperative to back up the line drivers in order to extend the life of our client’s installation over the next 10 years.
DV GROUP Solution
Satisfied with our quality of service during a previous emergency intervention on a 630 kW principal reinjection feed, our client entrusted us with the preventive repair of 43 Simovert Masterdrive drives from 0.75 kW to 700 kW.
So, over 8 weeks, the experts were mobilised onsite in Germany to process the products and meet the schedule imposed by our client.
Work carried out
DV GROUP technical solution:
- The dismounting and global de-polluting of all the drive components.
- Static monitoring of the power components via tracker + motor (insulation)
- Overhauling of the turbines (changing of the start-up condensators de start-up, as well as bearings)
- Monitoring of the intermediary buses on each drive (condensators deviation owing to ageing)
- Validation tests following reassembly of all the updated units
- Test for correct profibus communication between the API, the ET200 and drives
- Powering-on procedure of the installation via the process authorisations
- Successful sequential procedure of no-load testing of all the validated drives
- Full-load testing
Gains et bénéfices client
- Offre globale DV GROUP : prise en charge du préventif avec assistance au redémarrage
- Redémarrage de la ligne avec une installation fiabilisée
- Gain de productivité
- Gain économique
- Instauration d’un climat de confiance : échanges fréquents, pérennes et accompagnement du client avec un interlocuteur dédié DV GROUP dans la langue du client
Expertise
We provide you with engineering, maintenance and control solutions based on our knowledge of your processes.
Case studies
You may also be interested in

Vibration monitoring of a coffee production line

Obsolescence Management: Audit of a Truck Engine Factory’s Equipment Fleet

Repair and reliability of drives

ELOPAK: Corrective preventive electronic maintenance

Preventive maintenance of Siemens Masterdrives

To safeguard the reliability of 32 Siemens (6SE70) Masterdrives on a paper machine section

MELEGHY: Preventive maintenance of 24 Siemens Powerblocks drives

Preventive maintenance contract

Emergency repair on a 120KW ABB ACS800 drive

2 LEROY SOMER 600 kW variators

Overhaul of 12 Siemens Torque Simotics T-1FW3 motors

Preventive maintenance for 17 Siemens servomotors and drives

X-FAB : Replacement of two extractor fans

Troubleshooting of an induced draught fan

19 50 kg (2.2 kW) to 5 ton (7.2MW) motor/reducer/ventilator assemblies

Overhaul of an extruder reducer with 2 indexed output shafts

Maintenance électronique et électromécanique de 3 installations Banbury (moteurs CC et variateurs)

Moteur Siemens 450 KW avec mode de refroidissement à eau

Révision d’un moteur CC 540 KW de laminoir

LENGLET IMPRIMEURS : 1€ to reduce your energy bill

Modelling of the HTA/BT electric network

Fiabilisation d’une ligne de décapage

EMC analysis

Modélisation réseau

Reducer polymerizer vibration monitoring

Maintenance method improvement project

Contrat de mesures vibratoires

Contrat de suivi vibratoire

Contrôle par onde de choc de 46 moteurs asynchrones de 7,5KW (400V) à 750KW (5000V)

Remplacement de 4 CN obsolètes 810T par 1 CN Sinumerik 840D sl Siemens

Modification îlot ZF

Remplacement robot presse

Cellule robotisée de dépose résine et convoyage d’une ligne d’emballage de batteries DAIMLER

Robot de palettisation ligne peinture

Robot de lavage de bacs à endives

Digital Twin d’une nouvelle ligne de production

LENGLET IMPRIMEURS : Retrofit variateurs moteurs unités de récupération de solvant

Rétrofit de l’électronique de puissance et de commande d’une ligne de découpe

Rétrofit électrique pont HFX 16T

Motorisation of compressors in a colliery gas compression station

Obsolescence of the oven’s 7 CC ALSTHOM drives

Retrofitting of an impressive balancing bench

Retrofit of a machine for superfinishing machined parts

Retrofitting of the robotics part of a nine-colour printing line
