Obsolescence Management: Audit of a Truck Engine Factory’s Equipment Fleet
Casestudies
14 November 2023
Casestudie
12 September 2023
ELOPAK: Corrective preventive electronic maintenance
Context
Our client, a packaging manufacturer in the southwest of the Netherlands, is experiencing an increase in breakdowns on their machines equipped with Lenze servo-drives.
Problem
After investigation, we find that these drives are obsolete.
DV GROUP solution
We proposed to our client a corrective preventive workshop of all his drives.
In agreement with him, we proceeded by rotating 20 drives.
Arrival of the 20 modules in our workshops: Overhaul in less than 3 weeks : Delivery to the client
The client then exchanges his overhauled and corrected drives with those installed in his machines, then sends us a new batch… Until the complete overhaul of his 120 drives!
The advantages ?
No production downtime for our customer thanks to the rolling method
Reliability of the machines and the stock is achieved quickly: within 6 months.
Economically interesting solution compared to retrofitting.
Expertise
Wij bieden u engineering, maintenance, en control oplossingen op basis van onze kennis van uw processen.
Repair and reliability of drives
Casestudies
12 September 2023
Preventive maintenance of Siemens Masterdrives
Casestudies
11 September 2023
43 Simovert Masterdrive drives from 0.75 kW to 700 kW
Casestudies
11 September 2023
To safeguard the reliability of 32 Siemens (6SE70) Masterdrives on a paper machine section
Casestudies
11 September 2023
MELEGHY: Preventive maintenance of 24 Siemens Powerblocks drives
Casestudies
11 September 2023
Preventive maintenance contract
Casestudies
05 September 2023
Emergency repair on a 120KW ABB ACS800 drive
Casestudies
05 September 2023
2 LEROY SOMER 600 kW variators
Casestudies
05 September 2023
Overhaul of 12 Siemens Torque Simotics T-1FW3 motors
Casestudies
05 September 2023
Preventive maintenance for 17 Siemens servomotors and drives
Casestudies
04 September 2023
X-FAB : Replacement of two extractor fans
Casestudies
04 September 2023
Troubleshooting of an induced draught fan
Casestudies
04 September 2023
19 50 kg (2.2 kW) to 5 ton (7.2MW) motor/reducer/ventilator assemblies
Casestudies
01 September 2023
Overhaul of an extruder reducer with 2 indexed output shafts
Casestudies
01 September 2023
LENGLET IMPRIMEURS : 1€ to reduce your energy bill
Casestudies
01 September 2023
Modelling of the HTA/BT electric network
Casestudies
01 September 2023
Motorisation of compressors in a colliery gas compression station
Casestudies
29 August 2023
Obsolescence of the oven’s 7 CC ALSTHOM drives
Casestudies
29 August 2023
Retrofitting of an impressive balancing bench
Casestudies
29 August 2023
Retrofit of a machine for superfinishing machined parts
Casestudies
29 August 2023
Retrofitting of the robotics part of a nine-colour printing line
Casestudies
29 August 2023
Modification of the ride “Tonnerre 2 Zeus” [Zeus’ Thunder]
Casestudies
23 August 2023