Obsolescence Management: Audit of a Truck Engine Factory’s Equipment Fleet
Studi di caso
14 November 2023
Casi studio
29 August 2023
Obsolescence of the oven’s 7 CC ALSTHOM drives
Client expectation
The obsolescence of the oven’s 7 CC ALSTHOM drives, leading to the unavailability of spare parts, was making maintenance and repair impossible.
Our client therefore wished to replace these drives.
DV GROUP Solution
We suggested the following solution to our client:
- A preliminary analysis of the curve of currents used on each movement
- The replacement of the drive managing both motors simultaneously by two new drives, maintaining synchronisation.
- The implementation of continuous current MP 4 quadrant drives, which would be long-term and maintainable over time
- The creation of turntables in the workshop in order to minimise intervention time and the replacement of all the electro-technical equipment, including loop contactors
Implementation of 8 drives from 350A to 825A, 4-quadrant technology
Replacement of the ultra rapid contactors to break the loops
Preparation for network connection with the oven’s monitoring system
Analogue steering following this, at the client’s request
Work carried out
- Electro-technical design
- Electrical diagrams under See Electrical
- Creation of 6 solid-bottomed sheet base frames
- Removal of the electrical cupboards
- Fitting of the new base frames
- Commissioning
- Training
Competenza
Vi forniamo soluzioni di ingegneria, manutenzione e controllo basate sulla nostra conoscenza dei vostri processi.
Repair and reliability of drives
Studi di caso
12 September 2023
ELOPAK: Corrective preventive electronic maintenance
Studi di caso
12 September 2023
Preventive maintenance of Siemens Masterdrives
Studi di caso
11 September 2023
43 Simovert Masterdrive drives from 0.75 kW to 700 kW
Studi di caso
11 September 2023
To safeguard the reliability of 32 Siemens (6SE70) Masterdrives on a paper machine section
Studi di caso
11 September 2023
MELEGHY: Preventive maintenance of 24 Siemens Powerblocks drives
Studi di caso
11 September 2023
Preventive maintenance contract
Studi di caso
05 September 2023
Emergency repair on a 120KW ABB ACS800 drive
Studi di caso
05 September 2023
2 LEROY SOMER 600 kW variators
Studi di caso
05 September 2023
Overhaul of 12 Siemens Torque Simotics T-1FW3 motors
Studi di caso
05 September 2023
Preventive maintenance for 17 Siemens servomotors and drives
Studi di caso
04 September 2023
X-FAB : Replacement of two extractor fans
Studi di caso
04 September 2023
Troubleshooting of an induced draught fan
Studi di caso
04 September 2023
19 50 kg (2.2 kW) to 5 ton (7.2MW) motor/reducer/ventilator assemblies
Studi di caso
01 September 2023
Overhaul of an extruder reducer with 2 indexed output shafts
Studi di caso
01 September 2023
LENGLET IMPRIMEURS : 1€ to reduce your energy bill
Studi di caso
01 September 2023
Modelling of the HTA/BT electric network
Studi di caso
01 September 2023
Motorisation of compressors in a colliery gas compression station
Studi di caso
29 August 2023
Retrofitting of an impressive balancing bench
Studi di caso
29 August 2023
Retrofit of a machine for superfinishing machined parts
Studi di caso
29 August 2023
Retrofitting of the robotics part of a nine-colour printing line
Studi di caso
29 August 2023
Modification of the ride “Tonnerre 2 Zeus” [Zeus’ Thunder]
Studi di caso
23 August 2023