Casos particulos 11 September 2023

Preventive maintenance of Siemens Masterdrives

Client expectation

Our client contacted us within the context of the preventive maintenance of 3 SIEMENS Masterdrives. These controlled and ensured the volume and water pressure necessary for our client’s production. However, these drives had not been maintained for several years and the manufacturer had stopped offering after-sales service for them. In addition, the client did not have any spare drives in stock.

DV GROUP Solution

A DV GROUP expert visited our client to carry out the preventive maintenance of two of the three drives. The condensators on the intermediary circuit were replaced, dust removed and the drives were tested. Two weeks later, we recommissioned these two drives and dismantled the third drive. In January, we finished the preventive maintenance with the commissioning of the last drive.

Work carried out

Disassembly and re-assembly of three 150 kW Siemens Masterdrives at the client’s site.
Shipping of the drives to Metz; preventive maintenance with the replacement of the intermediate circuit condensators.
Monitoring and assistance at the start-up of the installation

Experiencia

Le ofrecemos soluciones de ingeniería, mantenimiento y control basadas en nuestro conocimiento de sus procesos.

Nuestra experiencia

Engineering

Nuestra experiencia

Control

Nuestra experiencia

Maintenance

Casos prácticos

Preventive maintenance of Siemens Masterdrives

Client expectation

DV GROUP Solution

Work carried out

Le ofrecemos soluciones de ingeniería, mantenimiento y control basadas en nuestro conocimiento de sus procesos.

Engineering

Control

Maintenance

También le puede interesar

Obsolescence Management: Audit of a Truck Engine Factory’s Equipment Fleet

Repair and reliability of drives

ELOPAK: Corrective preventive electronic maintenance

43 Simovert Masterdrive drives from 0.75 kW to 700 kW

To safeguard the reliability of 32 Siemens (6SE70) Masterdrives on a paper machine section

MELEGHY: Preventive maintenance of 24 Siemens Powerblocks drives

Preventive maintenance contract

Emergency repair on a 120KW ABB ACS800 drive

2 LEROY SOMER 600 kW variators

Overhaul of 12 Siemens Torque Simotics T-1FW3 motors

Preventive maintenance for 17 Siemens servomotors and drives

X-FAB : Replacement of two extractor fans

Troubleshooting of an induced draught fan

19 50 kg (2.2 kW) to 5 ton (7.2MW) motor/reducer/ventilator assemblies

Overhaul of an extruder reducer with 2 indexed output shafts

LENGLET IMPRIMEURS : 1€ to reduce your energy bill

Modelling of the HTA/BT electric network

Proyecto de mejora del método de mantenimiento

Motorisation of compressors in a colliery gas compression station

Obsolescence of the oven’s 7 CC ALSTHOM drives

Retrofitting of an impressive balancing bench

Retrofit of a machine for superfinishing machined parts

Retrofitting of the robotics part of a nine-colour printing line

Modification of the ride “Tonnerre 2 Zeus” [Zeus’ Thunder]